Sacrifice Flyte 120 Stunt Scooter

The Sacrifice Flyte 120 stunt scooter is the older brother of the Flyte 100, the world's lightest scooter, and is designed for grown-up scooter riders. Many people like to modify their scooters to make them as light as possible - with this model that will be very hard to do, because everything has already been done for you. All that's left is to head to the park with this scooter and learn tricks that were not possible before.

• Handlebar: Oversize extruded 6061-T6 Al, 580mm Wide x 600mm High
• Clamp: Spy 2 bolt collar clamp with 6ml high tensile bolts
• Compression: IHC
• Deck: Extruded 6061-T6 A1, 120mm x 525 mm, Integrated 82.5 deg Headtube
• Wheels: 120mm Delta Core offset 5-Spoke, 6061-T6 Al Core, 88A PU
• Bearings: Sacrifice Roller Coaster Bearing
• With brake
• Weight: 3.2 kg

STUNT SCOOTER RULES OF USE

Safety measures

As with other moving devices, riding a scooter can be dangerous. Before riding, read all the rules of use. Pay particular attention to these tips:

1. Always wear protective equipment, such as ANSI, SNELL, CPSC or ASTM certified helmets, knee and elbow protection, long-sleeved shirts and long trousers.
2. Always wear closed shoes and make sure they are properly fastened. Do not use the scooter barefoot or in sandals.
3. Always follow the applicable traffic and scooter riding rules. Watch out for other vehicles and give way to pedestrians.
4. Do not make any changes to the device's construction and do not use any accessories that are not supplied with the scooter.
5. Do not ride holding the device with only one hand. Hold the handles firmly with both hands.
6. When riding, do not make sharp turns and do not lean on the handles with your whole body in a turn, as they may twist and you may lose control.
7. Do not ride on slippery or wet road surfaces, as the polyurethane wheels may slip and you may lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. Riding in the rain reduces wheel grip, braking and visibility.
8. Do not ride on a steep slope, as the scooter may become uncontrollable or the brakes may not work well enough. Be especially careful when riding on uneven terrain. Do not ride at high speed downhill.
9. Ride only on level ground; do not ride on wet, uneven, stony or gravel surfaces. Do not ride at dusk or at night, or on damp or icy surfaces.
10. Avoid potholes, drainage grates and sudden changes in the road surface, as the scooter may stop suddenly.
11. Before riding, press the brake pedal and check that it works. With prolonged use, the brake pedal can get hot, so do not touch it after stopping, as you may get burned.
12. Turn the scooter handlebar left and right and check that the mechanism works properly. Before riding, also make sure the handles are held firmly.
13. Children must always ride under adult supervision. Before riding, the supervising person checks the scooter to make sure all its parts are properly fastened and to avoid an accident.
14. Since fingers can be pinched when assembling the scooter, adults must help children assemble and adjust the scooter. Do not touch moving parts or clamping mechanism parts to avoid injuring your fingers. Make sure all parts are firmly mounted.
15. If you do not follow the above safety tips, you may get injured.
16. Promptly replace worn or broken parts of the device.

6-month warranty; the warranty does not apply to wearing parts

The warranty is void if the device fails due to mechanical damage to the scooter, improper use or performing prohibited manoeuvres with it.

CHECK BEFORE RIDING

First, check that the brakes work.

Second, check that the handles are held properly and firmly.

Third, check that the wheels are held firmly and spin without disturbance.

Once you have checked everything and read the safety tips, you can start riding the scooter.

USER INSTRUCTIONS AND DEVICE MAINTENANCE

1. Turn the scooter's wheels and handlebar to check whether the mechanism bearings work smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamping bolts.
2. It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs to be replaced, make sure to order the correct part from the supplier (representative).
3. If the front part of the scooter (handlebar) is loose, the steering column mechanism is probably not properly tightened. Do not ride with a loose handlebar. Remove the handlebar and tighten the steering column tension bolt with a hex key. Reinstall the handlebar and firmly tighten the handlebar clamp.
4. Polyurethane wheels may wear out after some time. Contact the seller and replace them with new ones so it is safe to ride.
5. With regular use, the wheels and wheel bearings may wear out. They can be easily replaced. Undo the nuts fastening the wheel axle and pull out the wheel. Replace the wheel or bearings and firmly retighten the nuts with a wrench on both sides of the wheel. Make sure to order the correct wheels or wheel bearings from the supplier (representative).
6. Clean dirt and dust off the scooter with a damp cloth. Do not use cleaners or solvents that may damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts or soften stickers or sticker adhesive.
7. Before riding, make sure all parts are firmly mounted.
8. Mechanisms or parts may work worse over time. If any mechanism or part does not work as it should, it is recommended not to use the device, contact the supplier (representative) or importer and replace the mechanisms or parts with new ones.