Stunt Scooter Chilli Pro Rocky Vol.3

The Chilli Pro Rocky stunt scooter is designed for beginner riders getting acquainted with simple tricks. This updated model features a more reliable handlebar bearing system and stands out with excellent specifications at a low price and a distinctive design. It has a reliable chromoly (chrome-molybdenum) handlebar, one-piece alloy rims and high-quality wheels.

• Handlebar: 4130 CrMo steel (58 x 58 cm)
• Clamp: 2-bolt clamp, CNC aluminium HIC
• Compression: Universal HIC system
• Deck: 6061 aluminium (50 x 11.5 cm)
• Wheels: 110 mm spoke wheels, aluminium core 90A
• Bearings: ABEC 9
• With brake
• Height: 79 cm
• Weight: 3.5 kg

STUNT SCOOTER RULES OF USE

Safety measures

As with other moving devices, riding a scooter can be dangerous. Before riding, read all the rules of use. Pay particular attention to the following tips:

1. Always wear protective gear, such as ANSI, SNELL, CPSC or ASTM certified helmets, knee and elbow protection, long-sleeved shirts and long trousers.
2. Always wear closed footwear and make sure it is properly fastened. Do not use the scooter barefoot or in sandals.
3. Always follow the applicable traffic and scooter riding rules. Watch out for other vehicles and give way to pedestrians.
4. Do not make any changes to the structure of the device and do not use any accessories that are not supplied with the scooter.
5. Do not ride holding the device with only one hand. Hold the handles firmly with both hands.
6. When riding the scooter, do not make sharp turns and do not lean on the handles with your whole body in a turn, as they may twist and you may lose control.
7. Do not ride the scooter on slippery or wet surfaces, as the polyurethane wheels may slip and you may lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. Riding in the rain reduces wheel grip, braking and visibility.
8. Do not ride the scooter on a steep slope, as the scooter may become uncontrollable or the brakes may not work sufficiently. Be especially careful when riding on uneven terrain. Do not ride at high speed downhill.
9. Ride the scooter only on level ground; do not ride on wet, uneven, stony or gravel surfaces. Do not ride the scooter at dusk or at night, or on wet or icy surfaces.
10. Avoid potholes, drainage grates and sudden changes in the road surface, as the scooter may stop abruptly.
11. Before riding, press the brake pedal and check that it works. With prolonged use of the scooter, the brake pedal may heat up, so do not touch it after stopping, as you may get burned.
12. Turn the scooter handlebar left and right and check that the mechanism works properly. Before riding, also make sure the handles are firmly attached.
13. Children must always ride under adult supervision. Before riding, the supervising person should check the scooter to ensure all parts are properly attached and to prevent accidents.
14. Since fingers can be pinched when assembling the scooter, adults must help children assemble and adjust it. Do not touch moving parts or clamping mechanism parts to avoid injuring your fingers. Make sure all parts are firmly mounted.
15. If you do not follow the safety tips above, you may get injured.
16. Promptly replace worn or broken parts of the device.

6-month warranty; the warranty does not apply to wearing parts

The warranty is void if the device breaks down due to mechanical damage of the scooter, improper operation or performing prohibited manoeuvres with it.

CHECK BEFORE RIDING

First, check that the brakes work.

Second, check that the handles are properly and firmly attached.

Third, check that the wheels are firmly attached and spin without interference.

After checking everything and reading the safety tips, you can start riding the scooter.

USER INSTRUCTIONS AND DEVICE MAINTENANCE

1. Turn the scooter wheels and handlebar to check whether the mechanism bearings work smoothly. If necessary, after the first few rides, adjust them by tightening or loosening the clamp bolts.
2. It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs to be replaced, make sure to order the correct part from the supplier (representative).
3. If the front part of the scooter (handlebar) is loose, the handlebar column mechanism is probably not properly tightened. Do not ride with a loose handlebar. Remove the handlebar and tighten the column compression bolt with a hex key. Reinstall the handlebar and firmly tighten the handlebar clamp.
4. Polyurethane wheels may wear out over time. Contact the seller and replace them with new ones so it is safe to ride.
5. With regular use of the scooter, the wheels and wheel bearings may wear out. They can be replaced easily. Unscrew the nuts holding the wheel axle and pull out the wheel. Replace the wheel or bearings and firmly retighten the nuts with a wrench on both sides of the wheel. Make sure to order the correct wheels or wheel bearings from the supplier (representative).
6. Clean dirt and dust off the scooter with a damp cloth. Do not use cleaners or solvents that may damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they may damage the surface, dissolve parts or soften stickers or sticker adhesive.
7. Before riding, make sure all parts are firmly mounted.
8. Mechanisms or parts may work worse over time. If any mechanism or part does not work as it should, it is recommended not to use the device, contact the supplier (representative) or importer and replace the mechanisms or parts with new ones.