Sacrifice Flyte 100 Neochrome Stunt Scooter

The Sacrifice Flyte 100 stunt scooter is the lightest factory-assembled scooter in the world. Many riders like to modify their scooters to make them as light as possible - with this model that will be very hard to do, because everything has already been done for you. All that is left is to head to the park with this scooter and learn tricks that were not possible before.

• Handlebar: Extruded 6061-T6 Al, 500mm wide x 565mm high
• Clamp: Spy 2-bolt collar clamp with 6ml high tensile bolts
• Compression type: IHC
• Deck: Extruded 6061-T6 Al, 100mm x 495mm, integrated 82.5 deg headtube
• Wheels: 110mm Delta Core offset 5-spoke, 6061-T6 Al core, 88A PU
• Bearings: Sacrifice Roller Coaster Bearing
• With brake
• Weight: 2.8 kg

RULES FOR USING THE STUNT SCOOTER

Safety measures

As with any other moving equipment, riding a scooter can be dangerous. Before riding, read all the usage rules. Pay particular attention to the following advice:

1. Always wear protective gear, such as ANSI, SNELL, CPSC or ASTM certified helmets, knee and elbow protection, a long-sleeved shirt and long trousers.
2. Always wear closed footwear and make sure it is properly fastened. Do not use the scooter barefoot or in sandals.
3. Always follow the applicable traffic and scooter-riding rules. Watch out for other vehicles and give way to pedestrians.
4. Do not make any changes to the design of the device and do not use any accessories that are not supplied with the scooter.
5. Do not ride holding the device with only one hand. Hold the grips firmly with both hands.
6. When riding, do not make sudden turns and do not lean your whole body on the grips in a turn, as they may twist and you could lose control.
7. Do not ride the scooter on slippery or wet surfaces, as the polyurethane wheels may slip and you could lose control. Avoid roads where water, mud, sand, gravel, leaves or other debris accumulate. Riding in the rain reduces wheel grip on the road as well as braking and visibility conditions.
8. Do not ride the scooter on steep slopes, as the scooter may become uncontrollable or the brake may not work sufficiently. Be especially careful when riding on uneven terrain. Do not ride at high speed downhill.
9. Ride the scooter only on level ground; do not ride on wet, uneven, stony or gravel surfaces. Do not ride the scooter at dusk or at night, or on damp or icy surfaces.
10. Avoid potholes, drainage grates and sudden changes in the road surface, as the scooter may stop abruptly.
11. Before you start riding, press the brake pedal and check that it works. During prolonged use the brake pedal may become hot, so do not touch it after stopping, as you could get burned.
12. Turn the scooter's handlebar to the left and right and check that the mechanism works properly. Before you start riding, also make sure the grips are firmly attached.
13. Children must always ride under adult supervision. Before riding begins, the supervising person checks the scooter to ensure that all parts are properly fastened and to prevent accidents.
14. Since fingers can be pinched when assembling the scooter, adults must help children assemble and adjust the scooter. Do not touch moving parts or the parts of the tightening mechanism, so as not to injure your fingers. Make sure all parts are firmly mounted.
15. If you do not follow the safety advice above, you may be injured.
16. Promptly replace worn or broken parts of the device.

6-month warranty; the warranty does not cover wearing parts

The warranty is void if the device fails due to mechanical damage to the scooter, improper use or performing unauthorized manoeuvres with it.

CHECK BEFORE RIDING

First, check that the brakes work.

Second, check that the grips are properly and firmly attached.

Third, check that the wheels are firmly attached and spin without disturbance.

Once you have checked everything and read the safety advice, you can start riding the scooter.

USER INSTRUCTIONS AND DEVICE MAINTENANCE

1. Spin the scooter's wheels and handlebar to check whether the mechanism bearings run smoothly. If necessary, adjust them after the first few rides by tightening or loosening the clamping bolts.
2. It is recommended to fully disassemble and clean the scooter at least every 6 months. If a part needs to be replaced, make sure to order the correct part from your supplier (dealer).
3. If the front part of the scooter (handlebar) is loose, the fork/headset mechanism is probably not properly tightened. Do not ride with a loose handlebar. Remove the handlebar and tighten the compression bolt with a hex key. Refit the handlebar and firmly tighten the clamp.
4. Polyurethane wheels may wear out over time. Contact the seller and replace them with new ones so that it is safe to ride.
5. With regular use of the scooter, the wheels and wheel bearings may wear out. They can be replaced easily. Undo the nuts securing the wheel axle and pull out the wheel. Replace the wheel or bearings and firmly retighten the nuts with a wrench from both sides of the wheel. Make sure to order the correct wheels or wheel bearings from your supplier (dealer).
6. Clean dirt and dust off the scooter with a damp cloth. Do not use cleaners or solvents that could damage the surface. Do not use alcohol or substances containing alcohol or ammonia for cleaning, as they can damage the surface, dissolve parts or soften stickers or sticker adhesive.
7. Before you start riding, make sure all parts are firmly mounted.
8. Mechanisms or parts may work worse over time. If any mechanism or part does not work as it should, it is recommended not to use the device and to contact the supplier (dealer) or importer to replace the mechanisms or parts with new ones.